Authorized distributor of Delta Plus, Portwest, Safety Jogger, MSA & Ansell in Saudi ArabiaInstant reply in working hours · +966 11 222 7447
Get a Quote
Genuine product · KSA

Dräger Pac 6500

Dräger Pac 6500. Supplied in Saudi Arabia by Areej Future Trading.

  • Strong performance for maximum safety
  • Intuitively designed for user-friendly operation
  • Robust design for even the harshest conditions
  • User-friendly display with all important information
  • 360° alarm with various functions
  • Integrated data and event logging for analysis and reporting
  • Authorized distributor of Delta Plus, Portwest, Safety Jogger, MSA & Ansell
  • Most in-stock orders delivered within one day
  • Bulk pricing for companies – instant reply Sat–Thu, 8:00–18:00
  • Showroom in Riyadh · office in Dammam

Product details

The Dräger Pac 6500 is genuine Dräger gas detection equipment. The personal single-gas detector Dräger Pac 6500 measures CO, H2S, SO2 or O2, and is equipped with a Bluetooth® module. Areej Future Trading supplies Dräger products to companies across Saudi Arabia from Riyadh and Dammam.

Key features

  • Strong performance for maximum safety – You can rely on the Dräger Pac 6500: The personal single gas detection device warns against hazardous concentrations of carbon monoxide, hydrogen sulphide, sulphur dioxide or oxygen with precision and reliability.Powerful sensors with a very low t-90 … More information response time ensure quick reactions. The Pac 6500 is versatile thanks to its wide measurement range. For example, the CO sensor m
  • Intuitively designed for user-friendly operation – The D-Light indicates whether functionality of the device has been tested and if it is ready to use. The housing is also designed with your safety in mind: Each sensor variant of the Dräger Pac 6500 features clearly visible colour coding, minimising … More informationthe chance of mistakes.
  • Robust design for even the harshest conditions – The Pac 6500 can easily handle even extreme conditions: Depending on the sensor, it can withstand temperatures from -40°C to 55°C and air pressures between 700 and 1,300 mbar.A membrane filter protects the sensor from foreign matter such as dust and … More informationliquids. The housing is IP68-rated for resistance to impact and chemicals.
  • User-friendly display with all important information – The large, icon-based display clearly shows the gas concentration and other essential information, such as battery status. Bright backlighting ensures clear readability in low-light conditions.
  • 360° alarm with various functions – If the Dräger Pac 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all angles. The a … More informationudible alarm reaches 90 dB. The display can show the measured peak concentration. Previously recorded alarms can be reviewed later,
  • Integrated data and event logging for analysis and reporting – The Dräger Pac 6500 logs concentrations and events along with the date and time. Data can be transferred to a PC for further analysis via an interface.
  • Cost-effective operation – All versions of the Dräger Pac 6500 are equipped with extremely durable DrägerSensors and a powerful battery.The Pac 6500 is protected against water, dust and other foreign matter by a special membrane filter. When the filter becomes heavily soiled i … More informationn use, you can quickly and easily replace it yourself. The device is then ready to use again right away.
  • A quick function test saves time and reduces costs – Function tests and calibrations are particularly efficient with the Dräger X-dock calibration station. The automated bump tests in the X-dock offer a cost-effective and convenient solution thanks to their short test duration and exceptionally low tes … More informationt gas consumption. The Pac 6500 is simply placed in the bump test station and automatically selects the correct mode.
  • Bluetooth® communication – With the Bluetooth® enabled Pac you can wirelessly transmit live measurement values into the Dräger Gas Detection Connect system. You can easily track the location of the worker and their Pac by connecting the device to the Gas Detection Connect gate … More informationway app. Additionally, you can communicate with the Gas Detection Connect system via the Dräger ConHub explosion-proof gateway. Drä

Specifications

  • Brand: Dräger
  • Model: Pac 6500
  • Sensor type: Single-Gas Detector
  • Measurable gases: CO, O2, H2S, SO2
  • Number of gases: 1
  • Lifetime: unlimited
  • Personal Air Monitoring: yes
  • Temperature range (device): -40°C – 55°C
  • Battery service life: 2 years (24/7)
  • Air humidity (relative humidity) in %: 10% to 90%
  • Air pressure (hPa): 700 – 1300
  • Degree of protection (IP class): IP 68
  • Weight: 3.74 oz
  • Changable filter: easy to change from outside / mechanical connection
  • D-light: yes
  • TLV / STEL: yes
  • Peak: yes
  • Dual sensor: no
  • Alarm Hold: yes
  • ATEX: yes I M1 Ex ia I Ma II 1G Ex ia IIC T4 Ga (Zone 0)
  • IECEx: yes Ex ia I Ma Ex ia IIC T4 Ga
  • c CSA us: yes Class I, Zone 0, AEx ia IIC T4 Ga, Class II, Division 1, Group E, F, G
  • CE: yes
  • GOST (EAC): yes
  • Performance approval: no
  • Shipping approval (MED): yes

Documents

Ordering in Saudi Arabia

Send the model Pac 6500 and quantities on WhatsApp or by email and our sales team will confirm stock, price and delivery the same working day.

    Specifications

    Additional information

    Why buy from Areej

    Own ready stockWe trade directly and hold stock in Riyadh, so quotes are fast and prices competitive.
    Genuine & certifiedAuthorized distributor of Delta Plus, Portwest, Safety Jogger, MSA and Ansell, plus 40+ trusted brands.
    Bulk orders for companiesMixed sizes for whole teams, scheduled deliveries and company accounts.

    How to choose a safety helmet or face shield

    Industrial safety helmets in Saudi Arabia should meet EN 397 (or ANSI Z89.1 Type I). For electrical work choose a helmet rated to EN 50365 (1000 V AC), and for work at height pick a model with a 4-point chin strap so it stays on in a fall. Ratchet suspension is faster to adjust for different workers; pinlock is lighter and cheaper for visitors. Vented helmets are cooler in summer but are not suitable for electrical risks. Face shields and visors are tested to EN 166 against impact and splash, and welding helmets to EN 175 / EN 379. Replace a helmet after any heavy impact, or about every 3–5 years, because UV light and heat weaken the plastic.

    EN 397EN 50365EN 166ANSI Z89.1

    How to choose safety glasses and goggles

    Safety glasses for work in KSA should be marked to EN 166 or ANSI Z87.1. The marking F means low-energy impact, B medium-energy; K and N on the lens mean anti-scratch and anti-fog, which matter on hot, dusty sites. Clear lenses are for indoor work, grey or smoke lenses (EN 172) for outdoor sun glare, and IR or welding shades for hot work. Choose sealed goggles when there is chemical splash or fine dust, and over-glasses models for workers who wear prescription spectacles.

    EN 166EN 172ANSI Z87.1

    How to choose earplugs and ear muffs

    Hearing protection is needed when noise is above 85 dB(A). Earplugs are tested to EN 352-2 and ear muffs to EN 352-1 (helmet-mounted muffs to EN 352-3). Look at the SNR value: aim for a protected level of 70–80 dB at the ear, because too much attenuation stops workers hearing alarms and radios. Disposable foam plugs are cheapest for visitors, reusable corded plugs suit daily users, and ear muffs are easier to check and wear correctly. Detectable plugs are used in food and pharmaceutical plants.

    EN 352-1EN 352-2EN 352-3

    How to choose a respirator or mask

    Disposable masks are graded FFP1, FFP2 and FFP3 under EN 149 (N95 is the US equivalent of FFP2). FFP2 suits cement, sanding and general dust; FFP3 is for silica, fine metal fumes and hazardous dust. For gases and vapours you need a half mask (EN 140) or full face mask (EN 136) with the correct filter: A for organic vapours, B for inorganic gases, E for acid gases, K for ammonia and P3 for particles. Full face masks also protect the eyes. A fit test is recommended for every tight-fitting respirator.

    EN 149EN 140EN 136EN 14387

    How to choose safety gloves

    Work gloves are tested to EN 388, which gives four or five numbers for abrasion, cut, tear, puncture and the newer ISO cut level A–F. For general handling choose nitrile or PU coated gloves; for sheet metal and glass choose cut level C to F; for oil and grease choose nitrile coatings with good grip. Chemical gloves follow EN ISO 374, heat-resistant gloves EN 407 and welding gloves EN 12477. Electrical insulating gloves are rated by class under EN 60903. Always order the right size: loose gloves reduce grip and dexterity.

    EN 388EN ISO 374EN 407EN 12477

    How to choose safety shoes and boots

    Safety shoes are tested to EN ISO 20345. S1P and S3 are the most common grades on Saudi sites: both have a 200-joule toe cap and anti-static sole, while S3 adds water resistance and a puncture-resistant midsole. SRC is the highest slip-resistance rating. Choose composite toe caps and non-metallic midsoles for lighter, metal-free shoes, HRO soles for hot surfaces up to 300 °C, and SB or ESD models for electrical or electronic work. Ankle boots give more support on uneven ground; low shoes are cooler for warehouses and drivers.

    EN ISO 20345S1PS3SRC

    How to choose workwear and hi-vis clothing

    Hi-vis vests, jackets and coveralls are certified to EN ISO 20471 in Class 1, 2 or 3; Class 2 is the usual minimum near traffic and site vehicles, Class 3 for highways and night work. For oil and gas, refineries and electrical work choose flame-resistant clothing to EN ISO 11612, arc-flash rated garments to IEC 61482 and anti-static fabrics to EN 1149. In the Saudi heat, lightweight cotton or breathable FR fabrics keep workers cooler. We can add your company logo to coveralls and vests for bulk orders.

    EN ISO 20471EN ISO 11612IEC 61482EN 1149

    How to choose fall protection equipment

    A fall arrest system has three parts: anchor point, full body harness (EN 361) and connector such as an energy-absorbing lanyard (EN 355) or self-retracting lifeline (EN 360). Use a harness with a dorsal D-ring for fall arrest, and side D-rings for work positioning. Check the free-fall clearance below the worker before choosing a 2 m lanyard. Karabiners are tested to EN 362 and anchors to EN 795. Harnesses should be inspected before each use and by a competent person every 6–12 months.

    EN 361EN 355EN 360EN 795

    Ordering & delivery in Saudi Arabia

    1. Send your listShare the product, sizes and quantities on WhatsApp, phone or the quote form.
    2. Quote the same dayOur sales team replies with stock, price and delivery time, Sat–Thu 8:00–18:00.
    3. Fast deliveryMost in-stock orders reach Riyadh and the Eastern Province within one day; we ship across the Kingdom.
    4. Documents includedTax invoice, delivery note, and datasheets or certificates on request for project approvals.

    Frequently asked questions

    Is this product in stock in Saudi Arabia?

    Most sizes are held in our own stock in Riyadh. Message us with the quantity you need and we confirm availability and delivery the same working day.

    Can I order this product in bulk for my company?

    Yes. We supply contractors, factories, oil and gas sites and facility companies with bulk pricing, mixed sizes and scheduled deliveries. Company accounts are available.

    Is it genuine and certified?

    Every item is genuine and supplied through official brand channels. Areej Future Trading is an authorized distributor of Delta Plus, Portwest, Safety Jogger, MSA and Ansell, and we provide datasheets and certificates on request.

    How fast is delivery in Riyadh, Dammam and Jeddah?

    In-stock orders are usually delivered within one day in Riyadh and the Eastern Province, and in 2–4 working days to Jeddah and other cities.

    How do I get a price quote?

    Tap "Get a quote on WhatsApp" above, call +966 11 222 7447, or email sales@areejintl.com with the product name and quantity.

    0
    0
    Your Cart
    Your cart is emptyReturn to Shop