Authorized distributor of Delta Plus, Portwest, Safety Jogger, MSA & Ansell in Saudi ArabiaInstant reply in working hours · +966 11 222 7447
Engineered FR Vented Cargo Pants by Bisley Workwear – TenCate Tecasafe ® Plus and 700AI and FR Modacrylic, Lyocell, and Aramid 238gsm and TenCate FR Mesh 152gsm. Supplied in Saudi Arabia by Areej Future Trading.
The Bisley Engineered FR Vented Cargo Pants (BPC8092) is a genuine Bisley Workwear work pants and flame-resistant protection, built for oil and gas, petrochemical, electrical and other sites with flash-fire or arc risk. It is made from TenCate Tecasafe ® Plus and 700AI and FR Modacrylic, Lyocell, and Aramid 238gsm and TenCate FR Mesh 152gsm. Areej Future Trading supplies Bisley workwear to companies across Saudi Arabia from Riyadh and Dammam, with bulk pricing for companies.
Send the style code BPC8092, colours, sizes and quantities on WhatsApp or by email and our sales team will confirm stock, price and delivery the same working day.
| Colour | Navy |
|---|---|
| Size | 77 – 112R 87 – 132S Modern Fit |
| Fabric | TenCate Tecasafe ® Plus and 700AI and FR Modacrylic, Lyocell, and Aramid 238gsm and TenCate FR Mesh 152gsm |
Industrial safety helmets in Saudi Arabia should meet EN 397 (or ANSI Z89.1 Type I). For electrical work choose a helmet rated to EN 50365 (1000 V AC), and for work at height pick a model with a 4-point chin strap so it stays on in a fall. Ratchet suspension is faster to adjust for different workers; pinlock is lighter and cheaper for visitors. Vented helmets are cooler in summer but are not suitable for electrical risks. Face shields and visors are tested to EN 166 against impact and splash, and welding helmets to EN 175 / EN 379. Replace a helmet after any heavy impact, or about every 3–5 years, because UV light and heat weaken the plastic.
See all Helmets & face protection in Saudi Arabia or browse every category.
Safety glasses for work in KSA should be marked to EN 166 or ANSI Z87.1. The marking F means low-energy impact, B medium-energy; K and N on the lens mean anti-scratch and anti-fog, which matter on hot, dusty sites. Clear lenses are for indoor work, grey or smoke lenses (EN 172) for outdoor sun glare, and IR or welding shades for hot work. Choose sealed goggles when there is chemical splash or fine dust, and over-glasses models for workers who wear prescription spectacles.
See all Eye protection in Saudi Arabia or browse every category.
Hearing protection is needed when noise is above 85 dB(A). Earplugs are tested to EN 352-2 and ear muffs to EN 352-1 (helmet-mounted muffs to EN 352-3). Look at the SNR value: aim for a protected level of 70–80 dB at the ear, because too much attenuation stops workers hearing alarms and radios. Disposable foam plugs are cheapest for visitors, reusable corded plugs suit daily users, and ear muffs are easier to check and wear correctly. Detectable plugs are used in food and pharmaceutical plants.
See all Hearing protection in Saudi Arabia or browse every category.
Disposable masks are graded FFP1, FFP2 and FFP3 under EN 149 (N95 is the US equivalent of FFP2). FFP2 suits cement, sanding and general dust; FFP3 is for silica, fine metal fumes and hazardous dust. For gases and vapours you need a half mask (EN 140) or full face mask (EN 136) with the correct filter: A for organic vapours, B for inorganic gases, E for acid gases, K for ammonia and P3 for particles. Full face masks also protect the eyes. A fit test is recommended for every tight-fitting respirator.
See all Respiratory protection in Saudi Arabia or browse every category.
Work gloves are tested to EN 388, which gives four or five numbers for abrasion, cut, tear, puncture and the newer ISO cut level A–F. For general handling choose nitrile or PU coated gloves; for sheet metal and glass choose cut level C to F; for oil and grease choose nitrile coatings with good grip. Chemical gloves follow EN ISO 374, heat-resistant gloves EN 407 and welding gloves EN 12477. Electrical insulating gloves are rated by class under EN 60903. Always order the right size: loose gloves reduce grip and dexterity.
See all Gloves in Saudi Arabia or browse every category.
Safety shoes are tested to EN ISO 20345. S1P and S3 are the most common grades on Saudi sites: both have a 200-joule toe cap and anti-static sole, while S3 adds water resistance and a puncture-resistant midsole. SRC is the highest slip-resistance rating. Choose composite toe caps and non-metallic midsoles for lighter, metal-free shoes, HRO soles for hot surfaces up to 300 °C, and SB or ESD models for electrical or electronic work. Ankle boots give more support on uneven ground; low shoes are cooler for warehouses and drivers.
See all Safety footwear in Saudi Arabia or browse every category.
Hi-vis vests, jackets and coveralls are certified to EN ISO 20471 in Class 1, 2 or 3; Class 2 is the usual minimum near traffic and site vehicles, Class 3 for highways and night work. For oil and gas, refineries and electrical work choose flame-resistant clothing to EN ISO 11612, arc-flash rated garments to IEC 61482 and anti-static fabrics to EN 1149. In the Saudi heat, lightweight cotton or breathable FR fabrics keep workers cooler. We can add your company logo to coveralls and vests for bulk orders.
See all Workwear & hi-vis in Saudi Arabia or browse every category.
A fall arrest system has three parts: anchor point, full body harness (EN 361) and connector such as an energy-absorbing lanyard (EN 355) or self-retracting lifeline (EN 360). Use a harness with a dorsal D-ring for fall arrest, and side D-rings for work positioning. Check the free-fall clearance below the worker before choosing a 2 m lanyard. Karabiners are tested to EN 362 and anchors to EN 795. Harnesses should be inspected before each use and by a competent person every 6–12 months.
See all Fall protection in Saudi Arabia or browse every category.
Most sizes are held in our own stock in Riyadh. Message us with the quantity you need and we confirm availability and delivery the same working day.
Yes. We supply contractors, factories, oil and gas sites and facility companies with bulk pricing, mixed sizes and scheduled deliveries. Company accounts are available.
Every item is genuine and supplied through official brand channels. Areej Future Trading is an authorized distributor of Delta Plus, Portwest, Safety Jogger, MSA and Ansell, and we provide datasheets and certificates on request.
In-stock orders are usually delivered within one day in Riyadh and the Eastern Province, and in 2–4 working days to Jeddah and other cities.
Tap "Get a quote on WhatsApp" above, call +966 11 222 7447, or email [email protected] with the product name and quantity.
English English 
العربية
